7
5. Installation
(1) Installation place
①
Please install it on a firm material such as metals (nonflammable material) having no vibration.
②
Please have a space in surroundings without fail so as not to ruin heat radiation and install it vertically.
③
Oils and fats and chemicals, etc. may hurt the resin, painting, and the cable of BOX. These liquid and mist
must not splash directly on the controller.
(2) Installation hole and surrounding space
Please refer to the figure below for the dimension concerning controller's installation. Moreover, it is
necessary to leave a space shown in the figure below in the surroundings of the controller for heat radiation
(Unit: mm)
※
It is cooled with fan. Be sure not to house it in small closed container or enclose around with obstacles blocking air
flow. Please mount in such a manner that operating face side, side face and bottom face are left open. (Port of
cooling air is at the bottom face side.)
[Installation dimension]
高温部の近く
横向きにする
木材
水平にする
液体がかかる
上下逆さにする
正しい取付け
振動や衝撃のある場所
Placing horizontally
Placing under spillage of liquid
Placing correctly
Placing near hot temperature
Placing on wood
Placing sideways
Placing upside down
Placing in environment
with vibration or impact
MIN
MAX
JAPAN
AC200-230V 50/60Hz 12A
V.F. CONTROLLER
RUN
Vib.A
LIMIT
RoHS
162
142
180
116
23
156
7
170
116
6.5
2-φ
7
[Space to the surroundings]
MIN
MAX
JAPAN
AC200-230V 50/60Hz 12A
V.F. CONTROLLER
RUN
Vib.A
LIMIT
RoHS
141
20
(15)
37
60
5
5
Flow of air
Fixing face
Fan
Fixing leg
Surrounding obstacle
Exhaust outlet