34
9. Setting of functions
(1) Setting of the function
①
The function key is pressed for more than two seconds to change it
to the function group selection mode.
②
When the function group (J or H) that you want to change is
changed with UP/DOWN key and the data key is pressed, the
function
№
is displayed.
③
The function
№
that you want to change is displayed with UP/DOWN
key.
④
When the data key is pressed, the present data is displayed. The
display is blinked when the data can be changed.
⑤
Data is changed with UP/DOWN key.
Note: The data of J00, J01, J04, J05, J06, J10, J11, J12 and H23 in
the function can be changed only when the driving is stopping.
When you want to confirm data only, press the data key again or
press the function key. It returns to the function display.
If the state of not pressing key continues for 20 seconds after data
change, it returns to the normal screen without changing data. The
changed data becomes valid at the time when the data key is
pressed.
ＤＡＴＡ
ＥＮＴＥＲ
ＤＡＴＡ
ＥＮＴＥＲ
ＦＵＮＣ
ＲＥＳＥＴ