NRG USER MANUAL
SymphoniePLUS3 User Guide
SymphoniePLUS3_DataLogger_Manual
Rev. 17
[email protected] | Page 43
31 December 2018
iPack Programming Overview (All iPack types)
You are now ready to enter all of your iPack programming settings. WindLinx subscribers will be
provided this information through the WindLinx web portal. For non-WindLinx iPacks, the process for
programming ISP information is the same for every type of iPack.
You must have all of your ISP information (obtained from your Internet service provider) to program the
iPack and connect to the Internet. The process is much the same as if you were configuring a PC to
connect to the Internet. You may want to ask your company’s IT department for assistance if they
regularly configure your computer systems for Internet access.
The programming has been organized into a familiar folder-tab system, and will be discussed tab-by-tab.
You will want to take extra care during this section. Even a minor typographical error will prevent the
iPack from connecting to the Internet. It is strongly recommended that you get the iPack working before
bringing it to the field for installation!
Viewing the Pre-Loaded iPack Settings
From SDR’s Modify iPack Settings window, select File>Load from iPack from the menu. The status line
on the bottom of the screen should show the message “Transferring >>>>>>” followed by the message
“Done!” You will now see the fields populated with information that is currently programmed into your
iPack.
iPack Settings – ISP Information Tab
To edit a pre-loaded iPack configuration (.ipk file) with new information, first select the check box to the
right of the setting you are changing.
