NR Electric PCS-9785 Instruction Manual Download Page 6

Page: 6 / 108

Preface

PCS-9785 Satellite-Synchronized Clock

Date: 2019-07-05

7 Human Machine Interface

Description of the HMI panel, LCD display, menu tree and a detailed operating guide

8 Installation

Recommendation for unpacking, handling, inspection and storage with a guide to the
mechanical and electrical installation.

9 Commissioning

Commissioning recommendation for comprising checks on the calibration and functionality of
device.

10 Maintenance

General maintenance policy.

11 Decommissioning and Disposal

General decommissioning and disposal policy.

12 Appendix

The demonstration of IRIG-B time code format.

13 Revisions History

List of document modification and update history records.

We reserve all rights to this document and to the information contained herein. Improper use in particular reproduction and dissemination

to third parties is strictly forbidden except where expressly authorized.

The information in this manual is carefully checked periodically, and necessary corrections will be included in future editions. If

nevertheless any errors are detected, suggestions for correction or improvement are greatly appreciated.

We reserve the rights to make technical improvements without notice.

NR ELECTRIC CO., LTD.
Headquarters: 69, Suyuan Avenue, Jiangning, Nanjing 211102, China
Manufactory: 18, Xinfeng Road, Jiangning, Nanjing 211111, China

Tel: +86-25-87178888
Fax: +86-25-87178999
Website:

www.nrelect.com

www.nrec.com

P/N: ZL_PCS-9785_X_Instruction Manual_EN_Overseas General_X

Version: R1.20

08020

Summary of Contents for PCS-9785













































































































Search results

Summary of Contents for PCS-9785

Reviews:

NR Electric PCS-9785, Instruction Manual, Page: 6 / 108

Search results

Summary of Contents for PCS-9785

Reviews: