Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 58 / 148

58 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
6.4.2 Installing a Plug-In When RBS Is Not Configured
If you do not have Role-Based Services (RBS) configured for Novell eDirectory
TM
, install the
iFolder Manager Module as follows:
1 In a Web browser, log in to iManager on the iFolder server where you installed iManager.
https:// ifolder.example.com /nps/iManager.html
Replace
ifolder.example.com
with the IP address (such as
192.168.1.1
) or the DNS
name of the iFolder server.
If you installed iManager on a different server in the same tree as your iFolder server, log in to
iManager on that server.
2 In the toolbar, click the Configure icon (person seated behind a desk).
3 In Roles and Tasks, expand Module Installation , then click Available Novell Plug-In Modules .
4
Locate the iFolder iManager Module plug-in, select its plug-in check box, then click Install .
This install takes a few minutes. You should receive a message confirming a successful install.
5
Click OK to dismiss the message, then close iManager.
6 Stop and start the Tomcat servlet engine by entering the following command at the terminal
console:
/etc/init.d/novell-tomcat4 restart
Tomcat sometimes requires several minutes to fully initialize. Wait at least 5 minutes before
trying to log in to iManager.
7 Verify that the plug-in is enabled by opening iManager in a Web browser and checking to see if
the Novell iFolder 3 plug-in appears in the list of Roles and Tasks.
For information, see
Section 6.5, “Accessing iManager and the Novell iFolder 3 Plug-In,” on
page 59 .
8 Continue with Section 6.6, “Provisioning Users and iFolder Services,” on page 60 .
6.4.3 Installing a Plug-In When RBS Is Configured
If you are running iManager in Assigned Mode and have RBS configured for eDirectory, complete
the following steps to install the iFolder iManager Module.
IMPORTANT: To re-install an existing plug-in, you must first delete the rbsModule object for that
plug-in from eDirectory, using the Module Configuration > Delete RBS Module task.
1 In a Web browser, log in to iManager as an RBS Collection Owner on the system where you
installed iFolder.
https:// ifolder.example.com /nps/iManager.html
Replace
ifolder.example.com
with the IP address (such as
192.168.1.1
) or the DNS
name of the iFolder server.
2
In the toolbar, click the Configure icon (person seated behind a desk).
3 In Roles and Tasks, expand Module Installation , then click Available Novell Plug-In Modules .
4 Locate the iFolder iManager Module, select its plug-in check box, then click Install .