Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 128 / 148

128 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
mnt /dev/sda1 /mnt/ifolder3
Replace
/dev/sda1
with the disk or partition containing the file system.
The shared volume needs to be available at this time so that the shared SSL certificate on
the shared volume is accessible when YaST tries to restart Apache.
5b In YaSt, configure iFolder 3. x . For information, see Section 6.2, “Configuring the iFolder
Enterprise Server,” on page 53 .
For the System Store Path , specify the some temporary location; this value is replaced
later.
/tmp/ifolder3
At the end of the configuration, allow YaST to start Apache.
After the configuration has completed, open your Web browser to the iFolder server to
make sure it is running.
http:// 192.168.1.1 /simias10/Simias.asmx
Replace
192.168.1.1
with the IP address of the server node you are configuring. If
everything is working properly, you should get an authentication prompt.
5c If you installed iFolder 3. x Web Access server, in YaST, configure Web Access. For
information, see Section 6.3, “Configuring the iFolder Web Access Server,” on page 55 .
For the Web Access Alias , specify the same alias you used on Node 1 in Step 4h .
For the iFolder Server URL , specify SSL (by using https in the URL) and specify
localhost
as the location. For example:
https://localhost
5d
Stop Apache on the node you are configuring. At a terminal console, enter
/etc/init.d/apache2 stop
5e Replace the
/opt/novell/ifolder3/etc/simias-server-
bootstrap.config
file with the simias-server-bootstrap.config file from the first
node you configured.
5f Delete the
.local
directory under
wwwrun
. At a terminal console, enter
rm -rf /var/lib/wwwrun/.local
Deleting the node’s .local file is necessary so that the node can use the copy of the
/var/
lib/wwwrun/.local
directory on the shared volume after you create a symbolic link
to it in Step 5g . This also means that nodes share the
/var/lib/wwwrun/.local/
share/simias/Simias.config
file on the shared volume.
5g Create a symbolic link from the shared volume’s
.local
file to your
wwwrun
user’s
home directory. At a terminal console, enter
ln -s /mnt/ifolder3/.local /var/lib/wwwrun/
Verify that the symbolic link is valid. At a terminal console, enter
ll /var/lib/wwwrun/
If the link appears blue, it is valid. If the link appears red, the link is invalid.
5h Change ownership of the
.local
symbolic link to user
wwwrun
and group
www
. At a
server console, enter
chown -R wwwrun:www /var/lib/wwwrun/.local
5i Unmount the shared volume. At the server console, enter