Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 54 / 148

54 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
5 If you are using an NSS volume to store user data, you must set up NSS file system trustee
rights for the Web services user object
wwwrun
before restarting your web services. At a
terminal console prompt, log in as the root user or equivalent, then enter
rights -f /media/nss/ NSSVOL -r rwfcem trustee wwwrun.ou.o.treename
iFolder System
Configuration • System Name: A unique name to identify your iFolder 3 server.
For example,
IF3EAST Server
.
• System Store Path: The case-sensitive location where this iFolder
enterprise server stores the iFolder 3. x application files and the users’
iFolders and files. This location cannot be modified after the initial
configuration.
The store path should not be set at the root of a volume, such as the root
(
/
) or the root of a mount point (for example,
/mnt/ifolder3
). Make
sure to add a standard directory to the end of the path.
For example, if you store the data on a ReiserFS volume, the store path
might be any one of the following:
/var/opt/novell/ifolder3/data
/ifolder3/data
/mnt/ifolder3/data
For example, if you store the data on an NSS Volume, the store path
might be:
/media/nss/NSSVOL/ifolder3/data
If you use an NSS volume, you must set up NSS file system trustee rights
for the Web services user object
wwwrun
before restarting your web
services as explained in Step 5 .
• System Description: A descriptive label for your iFolder 3 server.
For example,
iFolder 3 Eastern Server
.
iFolder Admin
Configuration • iFolder Admin DN: The iFolder Admin user manages iFolder services
with the iFolder 3 plug-in to iManager. If it does not already exist, this user
is created and granted the necessary rights to manage all iFolder
services. Specify the fully distinguished name of the iFolder Admin user.
For example:
cn=ifolderadmin.o=acme
• iFolder Admin User Password: The password to use for the iFolder
Admin user. Type the password again to verify the entry.
• Proxy Context: The existing context where you want to create the
iFolder Proxy user. A generated username and password are used to
create the user in the specified context, then the user is granted the Read
right to LDAP. The generated username is
iFolderProxy xxxx
, where
xxxx
is a four-digit random number.
For example:
o=acme
You should never have to modify the user and password for the iFolder
Proxy user, but it is possible. For information, see
Section 8.4.2,
“Modifying the iFolder LDAP Settings,” on page 85 .
Install Settings Description