Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 38 / 148

38 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
If both iFolder components are installed on the same computer, both plug-ins are available;
otherwise, only the plug-in that is needed is available.
3.7.2 Novell iFolder 3 Plug-In for Novell iManager 2.5
The Novell iFolder 3 plug-in for Novell iManager 2.5 is an administrative tool used to manage the
iFolder system, user iFolder accounts, and user iFolders and data. For information about installing
iManager, see the
Novell iManager 2.5 Installation Guide (http://www.novell.com/documentation/
imanager25/imanager_install_25/data/hk42s9ot.html) .
Before you can use Novell iFolder 3 for managing your iFolder system, you must install it in
iManager. For information, see
Section 6.4, “Installing the Novell iFolder 3 Plug-In for iManager,”
on page 57 .
To access Novell iFolder 3, see Section 6.5, “Accessing iManager and the Novell iFolder 3 Plug-In,”
on page 59 .
Web Browser Language Setting
An iManager plug-in might not operate properly if the highest priority Language setting for your
Web browser is set to a language other than one of the supported languages. To avoid problems, in
your Web browser’s Languages setting, set the first language preference in the list to a supported
language, such as English.
NOTE: In the initial release, iFolder supports only English. Localization in additional languages is
planned for future releases.
Additional Information
For information about iManager, see the Novell iManager 2.5 Administration Guide (http://
www.novell.com/documentation/imanager25/imanager_admin_25/data/hk42s9ot.html) .
iFolder Plug-In for YaST Purpose Tasks
iFolder 3 Use this function to configure the following
parameters for the iFolder enterprise server.
• LDAP server name, LDAP admin DN,
and password
• iFolder system name, store path, and
description
• iFolder proxy DN, password, and
search context for retrieving user
information from LDAP
• iFolder admin DN and password
In YaST, click Network Services ,
then click iFolder 3 .
For information, see Section 6.2,
“Configuring the iFolder
Enterprise Server,” on page 53
.
iFolder 3 Web Access Use this function to configure the following
parameters for the iFolder Web Access
server.
• Web Access alias
• iFolder server URL
In YaST, click Network Services ,
then click iFolder 3 Web Access .
For information, see Section 6.3,
“Configuring the iFolder Web
Access Server,” on page 55
.