Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 73 / 148

Managing an iFolder Enterprise Server 73
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
7.6.4 iFolder Path Examples
The following examples show how to use iFolder paths to backup and restore data at different levels
in the iFolder store.
/
Back up or restore the entire iFolder store.
/myOwner.12345678-1234-1234-1234-123456789abc
Back up or restore all Collections owned by
myOwner
.
/myOwner.12345678-1234-1234-1234-123456789abc/myCollection.22345678-
1234-1234-1234-123456789abc
Back up or restore the Collection named
myCollection
. If the Collection is an iFolder, all files
and directories in the iFolder will be backed up or restored along with the Simias data in the
Collection store.
/myOwner.12345678-1234-1234-1234-123456789abc/myCollection.22345678-
1234-1234-1234-123456789abc/myFile
Back up or restore the file named myFile in the root directory of the iFolder along with its Simias
data from the Collection store.
/myOwner.12345678-1234-1234-1234-123456789abc/myCollection.22345678-
1234-1234-1234-123456789abc/mySubdir
Back up or restore the subdirectory named
mySubdir
in the root directory of the iFolder along
with its Simias data from the Collection store, and recursively backup or restore each file and
subdirectory in
mySubdir
along with its respective Simias data.
7.6.5 SMSConfig Options
The TSAIF command is not a standalone shell command; it is exercised using smsconfig. All
configuration options are managed via smsconfig. The TSAIF can be configured during registration
and the configuration persists until TSAIF is unloaded.
All long options (options that have the format
--optionname
) are case insensitive.
Option Command
--help
Displays the options supported by the TSA.
--ReadBufferSize
This is the amount of data (Bytes) read from the Simias store and/or
file system by a single read operation. This switch is based on the
buffer sizes used by the applications. For example, if the application
requests 32 KB of data for each read operation, set the buffer size to
32 KB to allow the TSA to service the application better. This value
works well with Simias store and/or file system reads if set in
multiples of 512 Bytes. The default value is 64 KB.
--ReadThreadsPerJob
This enables the TSA to read data ahead of the application request
during backup. This switch is based on the number of processors in
the system. This switch can also be used to influence the disk activity
based on system configuration. The default value is 4.