Novell IFOLDER 3 - ADMINISTRATION, Manual

Page: 82 / 148

82 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
4 In Roles and Tasks, expand the Novell iFolder 3 role to show its tasks.
5 Select any of the tasks to go to the Connection page where you log in to the iFolder server you
want to manage.
When you first log in to iManager or if you have disconnected from an iFolder server
management session, any task you select takes you to the Connection page.
6
Continue with Section 8.2, “Connecting to the iFolder Server,” on page 82 .
8.2 Connecting to the iFolder Server
Although you are logged in to iManager, you must provide the iFolder administrator credentials to
authenticate to the specific iFolder server you want to manage. The iFolder Admin username can be
the same LDAP identity as your iManager Admin username, depending on how you configure your
iFolder system.
If you are not logged in to an iFolder server, whenever you click a task under the Novell iFolder 3
role, the Connection page opens to allow you to log in to the iFolder enterprise server you want to
manage. Log in with the iFolder Admin username and password for the target server.
NOTE: You cannot manage Novell iFolder 2.1 x servers with the Novell iFolder 3 plug-in to
iManager.
To connect to the iFolder server you want manage:
1 In a Web browser, log in to iManager.
For information, see Section 8.1, “Accessing the Novell iFolder 3 Plug-In for iManager,” on
page 81 .
2 In Roles and Tasks, expand the Novell iFolder 3 role, then select the task you want to perform.