2.5 Detaching the laser receiver
It is recommended that the laser receiver is detached when it is not being used, for example when
carrying out work where there is a risk of damaging the laser receiver, such as dredging. When
removing the laser receiver, be sure to connect the detached cables together afterwards. Apply a
small amount of
anti-corrosion gel or grease
into the connector parts of the cables in order to
prevent water from getting into the connectors.
Caution
Always remember to put anti-corrosion gel or grease into the connectors (for
example SuperLube® Anti-Corrosion Gel).
2.6 Replacing a tilting bucket with a non-tilting bucket
Detach the cable going into the tilt bucket sensor, apply grease to the cable connector and attach a
plug to protect the connector.
Select the bucket that will be used from “Main menu” → “Buckets” and go to “Tilt calibration”. The
first 1/7 page is for switching the tilt function ON or OFF. If the tilt function is ON, press the “0.0”
button to switch it OFF.
Caution
Always remember to put anti-corrosion gel or grease into the connectors (for
example SuperLube® Anti-Corrosion Gel).
Xsite EASY | User manual | Page 14 of 52
Figure 6. Laser receiver connected and bypassed
