4 CHANGING THE BUCKET AND THE MEASURING POINT
To change the bucket
1. Open the bucket selection list by pressing the “Bucket” button (Figure 14).
2. Choose the desired bucket on the list and press either “OK” or the right arrow button.
3. Select the correct measuring point.
Note
If the bucket is being used for the first time, it is worn out or the measurements
have been changed, see chapter 5 for instructions on how to add, edit or calibrate
the bucket.
During work, the measuring point can be changed using the left and right arrow keys. Choose left,
centre, right or automatic measuring point. When automatic mode is chosen, the system selects
the lowest point of the bucket as the measuring point when the bucket blade is tilted over 3
degrees. When the bucket blade is tilted less than 3 degrees, the system selects the buckets
centre as the measuring point
Note
The current bucket and measuring point is shown in the status bar (chapter 3.2.2).
Xsite EASY | User manual | Page 22 of 52
Figure 14. Changing the bucket