Particularly applicable:
The foreman must make sure he is aware of the current operational safety regulations and,
in a risk assessment, be able to detect additional risks caused by the special working
conditions at the usage site of the product. These risks must be compiled in the form of
written instructions, which must then be kept near to the product and permanently be
available for the persons working with it
The foreman must clearly define the responsibilities of the personnel with regard to the
appliance
The foreman must ensure that the contents of the instruction manual have been fully
understood by the operating personnel
The information in the instruction manual must be observed thoroughly and without
exception
The foreman must ensure that all maintenance, inspection and assembling processes are
carried out by qualified, specialized personnel, and that such personnel have fully
acquainted themselves with the product and its application by carefully studying the product
manuals
The foreman must inform the manufacturer or the authorized dealer if any safety defects
are found or occur during operation
Special risks
Caution
Epilepsy warning
Some people are susceptible to epileptic seizures or loss of consciousness when
exposed to certain flashing lights or light patterns. Immediately discontinue use
and consult your doctor if any of the following symptoms occur while using the
product: dizziness, blurred vision, eye or muscle twitches, loss of consciousness,
disorientation or any involuntary movement or convulsion.
Caution
Risks caused by electric current
When working close to electricity systems (for example overhead powerlines),
there is a danger of death due to electric shock. Keep sufficient safety distance to
electrical systems.
Caution
Moving components
Keep other persons away from the working range of the machine and the tool.
Remove objects from the working range of the machine and the tool. Do not
interfere with the moving components during operation.
Caution
Overhanging machine parts
System components assembled after the machine has left the factory can increase
the typical dimensions of the machine. Being unaware of this can lead to injuries
and material damages.
Xsite EASY | User manual | Page 4 of 52
