6.1 Digging from zero level
When digging from zero level, set the bucket at the desired level or starting point (the stake in this
example) and then press the “0.0” button. The reading “0.00” appears on the screen (Figure 23).
Measure the depth with the bucket. The system indicates the depth of the measuring point
compared to the zero level. A positive reading value is above the zero level and a negative reading
value is below it (Figure 24).
Xsite EASY | User manual | Page 31 of 52
Figure 23. Zeroing the reading on a stake
Figure 24. Digging towards wanted value
