-
17
-
NOVATEK-ELECTRO EM-481
Parameter
Range of
values
Factory
setting
Description
Address
IP-address of
the server
IP-address
0.0.0.0
It is used when connecting to the server (except for mode
"2"), if the server address setting is turned off with text string.
IP address of the remote server with which the connection is
supported.
470
–
473
Server address
Character
string
modbus.
overvis.c
om
It is used when connecting to the server (except for mode "2"),
if the server address setting is turned on with text string.
Address of the remote server with which the connection is
supported.
The string of up to 36 characters can be indicated as address.
This string should not have any spaces.
474
–
509
Protection
Specified
password for
access to the
mode of setting
Character
string
11111
It is used to access the MODBUS TCP configuration mode.
The string of 5 to 10 characters in length can be indicated as
password. This string should not have any spaces.
510
–
519
Parameter is
not used
0
0
It is not used; it should be equal to 0 for compatibility.
520
–
529
The specified
password for
recording per-
mission using
incoming SMS
Character
string
gap
It is used to verify the authenticity of incoming SMS with
request for record or with acknowledgment of the fault. The
string of 3 to 10 characters in length can be indicated as
password. This string should not have any spaces.
530
–
539
The specified
password for
reading per-
mission using
incoming SMS
Character
string
gap
It is used to verify the authenticity of incoming SMS with
request for reading or with acknowledgment of the fault. The
string of 3 to 10 characters in length can be indicated as
password. This string should not have any spaces.
540
–
549
The specified
password for
recording per-
mission via
MODBUS TCP
in devices using
RS-485
Character
string
It is used to access devices connected to the EM-481, to
request write or control functions that can change the status
of these devices. The string to 10 characters in length can
be indicated as password. This string should not have any
spaces.
550
–
559
The specified
password for
reading
permission via
MODBUS TCP
Character
string
It is used to access devices connected to the
EM-481, to request read functions, or to access the EM-481
registers, except for registers of version, password, mode and
tabs. The string to 10 charac-ters in length can be indicated as
password. This string should not have any spaces.
560
–
569
Enable the
protection mode
against writing
via SMS
0
– 1
0
0
– Protection against recording is regulated with help of
other parameters (password);
1
– Blocking of queries via SMS for function of writing.
570
Enable the
protection mode
against reading
via SMS
0
– 1
0
0 - Protection against reading is regulated with help of other
parameters (password);
1
– Blocking of queries via SMS for function of reading.
571
Enable the
protection mode
against writing
via MODBUS
TCP
0
– 1
0
0
– Protection against recording is regulated with help of
other parameters (password) or deactivated;
1 - Blocking of any queries for functions, excepting functions
of MODBUS 1, 2, 3, 4, 7, 17, 20.
572
Enable the
protection mode
against reading
via MODBUS
TCP
0
– 1
0
0
– Protection against reading is regulated with help of other
parameters (password) or deactivated;
1
– Blocking of queries for functions of MODBUS 1, 2, 3, 4, 7,
17, 20, excepting reading using function 3 of registers of
version, mode and tabs.
573
Parameter is
not used
0
0
It is not used; it should be equal to 0 for compatibility.
574
Table 5.8 Continued
