-
14
-
EM-481
NOVATEK-ELECTRO
Sunset time, s
-1: Sunset is not observed on this day;
0
–86399: Number of seconds from midnight to sunset;
234
– 235
Time of day, ms
Number of milliseconds from midnight of the current day
236
– 237
Current IP-address of
GSM**
IP-address obtained from GPRS* provider
900
– 903
Unused parameter The parameter is reserved for compatibility
904
– 914
GSM signal level, %**
Signal level and quality of radio communication with GSM provider
915
Unused parameter
The parameter is reserved for compatibility
916
– 931
SIM card account status** The account status received on the last USSD request (sent
automatically once a day). As an account, the first number in the
operator's response is taken.
-2147483648
– the account status is unknown
932
– 933
Time for receiving the SIM
card account value**
The number of seconds from January 1 of the specified year (see reg.
172).
0
– account status was not accepted
934
– 935
User parameters of status User parameters of status after starting take a value of 0. They can be
used for storage and transmission to the server of values to be
measured and calculated in the values files.
5000
–
5219
User parameters of
statistics
They store the value for the operating time of the built-in battery for
the clock. They can be used in the task files for statistics gathering or
saving state
5220
–
5249
N o t e s :
*
– IP-address of device in GSM network can be allocated dynamically. For the access to the device via GSM using
its IP-address, please contact the
GSM operator;
**
– content of registers is available only in the setting mode.
Table 5.8
– Setting parameters
Parameter
Range of
values
Factory
setting
Description
Address
Ethernet network
Static
IP-
address
IP-address
192.168.0.
111
If the dynamic addressing is switched off or not available, IP-
address of the device in Ethernet network is equal to this
value
300
– 303
Subnetwork
mask
IP-mask
255.255.2
55.0
It is used only with static IP-address
304
– 307
Gateway
IP-address
192.168.
0.1
It is used only together with static IP-address for
communication with other networks, or as an address of
DNS/DHCP servers
308
– 311
Switch on the
dy-namic
addressing with
a help of DHCP
0
– 1
1
0 - for addressing in Ethernet, the specified values of the IP
address, mask and gateway are used;
1 - If DHCP server is available in the network, then IP
address, mask and gateway are received from the server.
312
Switch on the
filter of IP-ad-
dress of DHCP-
server
0
– 1
0
It is used for dynamic addressing.
0 - the addressing data from the first responding DHCP
server is received;
1
– the device receives addressing data only from DHCP-
server with IP-address of the gateway
313
Switch on the
use of server
gateway DNS
0
– 1
1
It is used if DHCP is not available (switched off):
0: DNS of gateway is not used;
1: The gateway DNS is used to determine the IP addresses
of other servers, if they are specified by host names.
314
IP-address of
DNS server
IP-address 8.8.8.8
It is used if DHCP is not available (switched off);
When the server of DNS gateway is used, it sets IP-address
of additional DNS server
315
–318
IP-address of
ad-ditional DNS
server
IP-address 0.0.0.0
It is used if DHCP is not available (switched off);
0.0.0.0
– it is not used.
319
– 322
Enable MAC
address
override
0
– 1
0
0 - unique value for each device is used as MAC address;
1 - is used of manually set MAC address.
323
Table 5.8 Continued
