23
FIBER_TIGER_manual, 2021-11-29
A
4.
Preparing for use
4.3. Installing
How to disconnect the self-sealing quick connectors at the scan head (1)
• Push the end piece (marked red in figure 4.8 on page 23) of the self-sealing
quick connector in direction A, pull the coupling plug out B and immediately
release the end piece again.
B
Figure 4.8.: Unplugging the self-sealing coupling
How to disconnect the quick connectors at the fiber coupling (2)
• Press the end piece (marked red in figure 4.9 on page 23) into the quick con-
nector, hold it pressed down and pull out the hose.
Figure 4.9.: End piece of the cooling water quick connector (marked red)
4.3.4. Connecting the purge gas
Keep the scan head under low overpressure. Firstly less dust can enter the scan head that
way. Secondly the purge gas outlet generates a flow away from the protective window and
reduces that way its contamination.
Target audience and qualification
Experts
