18
FIBER_TIGER_manual, 2021-11-29
4.3. Installing
4. Preparing for use
4.3.2. Affixing warning labels
The scan head itself is not a laser device but it is used together with a class 4 laser.
Therefore you have to affix warning labels clearly visible to the laser device where the
scan head will be incorporated. As we cannot know the installation situation you have to
determine by yourself where to place the warning labels on the laser device.
Note that the menitioned warning labels are not included in delivery.
Procedure
1. Affix the label from figure 4.2 on page 18 clearly visible near the laser aperture of
the scan head.
Figure 4.2.: APERTURE label
We suggest one of the following 3 locations; marked in red in figure 4.3 on page
Figure 4.3.: Suggested locations for the APERTURE label
2. Inscribe the laser parameters into one of the labels in figure 4.4 on page 19.
