33
FIBER_TIGER_manual, 2021-11-29
TIP
If you do not use the InScript 3 software yet, but still use the InScript 2 soft-
ware, then consult the scan head manual [4], section
Commissioning
, instead
of the following procedure.
4. Preparing for use
4.4. Commissioning
4.4.2. Correcting the scan field
In the InScript software, configure the scan head by the
head
device and correct the scan
field then.
Target audience and qualification
Experts
Requirements
The laser, the ARGES system controller and the scan head are incorporated in the
superordinate machine and correctly connected.
The superordinate machine complies with the standards that are required by the
declaration of incorporation at the end of this document.
The InScript software is installed and commissioned. The latter includes commission-
ing the ARGES system controller and the laser.
Procedure
1. In the InScript software in the
Navigator
view, open the context menu of the scan
head’s superordinate controller and click Manage scan field correction.
2. Follow the wizard’s on-screen instructions.
If you need a more detailed description or instructions then click Info in the wizard’s
window.
