Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 75 / 133

4 - WORKING OPERATIONS
4-17
9. Start the flow of “Material”
A
into the “Intake Hopper“
B
.
(See Fig. # 4-36)
A
B
Fig. # 4-36 Start the Flow of “Material” into the “Intake
Hopper“
10.Ensure that “LH & RH Hopper Flaps” are in the fully
lowered position before moving the grain truck to the next
bin gate if obstructed, and driving truck off of the “Drive
Over Ramps” .
(See "Hopper Flaps Raise / Lower Control
Lever" On Page 4-8)
11. If necessary, repeat the previous relevant steps until all
bins are empty.