Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 92 / 133

5 - MAINTENANCE
5-14
3. Tighten “Bearing Nuts”
A
.
(See Fig. # 5-20) (See Fig.
# 5-21)
Fig. # 5-20 Tighten “Bearing Nuts” (Hydraulic Drive Option)
A
A
Fig. # 5-21 Tighten “Bearing Nuts” (Electric Drive Option)
A
A
4. Start the conveyor and run the conveyor belt slowly for
one (1) minute.
5. If belt is centered continue to the next step, if not repeat
the alignment process.
6. Tighten “Bearing Nuts”
A
.
(See Fig. # 5-20) (See Fig.
# 5-21)
7. Replace any covers or guards that may have been re -
moved.