Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 100 / 133

5 - MAINTENANCE
5-22
Monthly
Check The Hydraulic Oil Level
The optional “Wet Kit with Electric Drive” which consists of a
hydraulic pump and reservoir mounted on the right side of the
discharge section. The system is virtually maintenance-free,
except for checking the oil level in the reservoir.
1. If the machine is in the raised position, Install transport
locks on left and right side of the lift axles to avoid cyl -
inders settling during servicing.
(See"Transport Locks:
Locking & Stowing" on page 4-12)
WARNING
• Hydraulic Drive Option: Engage park brake, place
transmission in PARK, shut off engine, remove key,
and wait for all moving parts to stop before leaving
the tractor cab.
• Electric Drive Option: Turn machine OFF, shut down
and lock out power source, unplug power cord and
wait for all moving parts to stop before inspecting,
servicing or repairing machine.
• Keep body, hair, and clothing away from moving con -
veyor belt and rollers.
• Do not operate with any guards removed or modified.
Keep guards in good working order. Failure to comply
could result in death or serious injury.
2. Check the level when the oil is cold by removing the cap
from the reservoir.
(See Fig. # 5-32)
Oil Fill Level
Fig. # 5-32 Check The Hydraulic Oil Level
3. Use an ISO grade 36 hydraulic oil for all operating con -
ditions (Hydrex MV36 or comparable).
4. Fill the reservoir so that oil is 1” to 1-1/2” (25 mm to 40
mm) from the top.
(See Fig. # 5-32)
Hydraulic Oil Reservoir Capacity
Quarts Gallons Liters
25.5 6.38 24.13
5. After filling, close and secure the cap.