Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 16 / 133

2 - SAFETY INFORMATION
2-6
Lock-Out Tag-Out Safety
Before you start servicing the machine:
If machine is connected to a tractor, Park on a level surface,
engage park brake, place transmission in PARK, shut off
engine, remove key, and wait for all moving parts to stop
before leaving tractor cab.
If machine is detached from tractor, block wheels and use
safety stands to prevent movement.
Attach a
“Do Not Operate”
warning tag to the machine in an
area that will be visible.
do not
operate
signed by
date
WARNING
1. Establish a formal Lock-Out Tag-Out program for your
operation.
2. Train all operators and service personnel before allowing
them to work around the area.
3. Provide tags on the machine and a sign-up sheet to record
tag out details.
Non-Permissible Use
CAUTION
Working on an uncleaned and non-maintained machine
poses unnecessary danger and is therefore forbidden.
Pay attention to the following applications for which the
machine is not suitable:
Machine usage for Canola, and any non-agricultural grains.
Machine usage to move gravel or large rocks.
General Maintenance Safety
1. Review the Operator’s Manual and all safety items before
working with, maintaining or operating the Kwik-Pit.
2.
When machine is connected to a towing vehicle, park on
a level surface, engage park brake, place transmission
in PARK, shut off engine, remove key, and wait for all
moving parts to stop before leaving vehicle cab.
If machine is detached from a towing vehicle and in the
raised position, block wheels and use safety stands to
prevent movement.
3. Do not attempt to clean, lubricate, clear obstructions or make
adjustments to the machine while it is in motion or while the
engine is running.
4. Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools are properly
grounded.
- Use adequate light for the job at hand.
5. Before applying pressure to a hydraulic system, make sure
all components are tight and that hoses and couplings are
in good condition.
6. Relieve pressure from hydraulic circuit before servicing or
disconnecting from tractor.
7. Clear the area of bystanders, especially children, when
carrying out any maintenance and repairs or making any
adjustments.
8. Place stands or blocks under the frame before working
beneath the machine.
9. Before resuming work, install and secure all guards when
maintenance work is completed.
10. Keep safety decals clean. Replace any decal that is dam -
aged or not clearly visible.
11. Always make sure working area is clear of tools, parts, other
persons and pets before you start operating the machine.
12. On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.