Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 27 / 133

2 - SAFETY INFORMATION
2-17
Safety Decals
The following safety decals are placed on your machine as a guide for your safety and for those working with you. Walk around
the machine and note the content and location of these safety decals before operating your machine.
Keep safety decals clean and legible. Clean safety decals with a soft cloth, water, and a gentle detergent. Do not use solvent,
gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove safety decals.
Replace all safety decals that are damaged, missing, painted over, or illegible. If a safety decal is on a part that is replaced,
make sure the safety decal is installed on the new part. See your dealer for replacement safety decals.
Safety decals that display the “Read Operator’s Manual” symbol are intended to direct the operator to the operator’s manual
for further information regarding maintenance, adjustments, or procedures for particular areas of the machine.
When a safety decal displays this symbol, refer to the appropriate page of the operators manual.
Safety Decal Locations
Fig. # 2-5 Safety Decal Locations (Hydraulic Drive Option)
10
11
13
12
14
2
5
1
3
4
5
6
10
6
5
9 5
8
7
Item
Part
Number
Description Qty. Item
Part
Number
Description Qty.
1 90-44-0262 Decal, Safety Information 1 8 90-44-0269 Decal, Notice Wheel Movement 1
2 90-44-0295
Decal, Warning - Read and Understand - Manual Holder
1 9 90-44-0258 Decal, Caution Belt Guard Slip Hazard 1
3 90-44-0173 Decal, High Pressure Hazard 1 10 90-44-0021 Decal, Danger Missing Guard (2 x 3.5) 2
4 90-44-0369 Decal, Danger Crush Hazard Stand Clear 1 11 90-44-0167 Decal, Rotating Parts Hazard Decal 1
5 90-44-0296
Decal, Warning - Entanglement and Open Belt Hazard
4 12 90-44-0565 Decal, Operation Hopper & Lift Valve (Kwik-Pit) 1
6 90-44-0566 Decal, Warning - Slip Hazard (Kwik-Pit) 2 13 90-44-0564 Decal, Operation Conveyor Belt Speed (Kwik-Pit) 1
7 90-44-0257 Decal, Warning Transport Hazard 1 14 90-44-0569 Decal, Crush Hazard Transport/Service Pin 2
N ING
AR
DANGER
MISSING GUARD HAZARD
Machine is shown with guard removed
for illustrative purposes.
• Turn machine OFF, shut down and lock
out power source, unplug power cord
and wait for all moving parts to stop
before inspecting, servicing or repairing
machine.
• Keep body, hair, and clothing away from
moving conveyor belt and rollers.
• Do not operate with any guards removed
or modified. Keep guards in good work -
ing order. Failure to comply could result
in death or serious injury.