Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 64 / 133

4 - WORKING OPERATIONS
4-6
Connecting Hydraulic Hoses To Tractor
1. If the hydraulic hoses are not already installed onto the
Kwik-Pit, please do so at this time. (See"Installing Hydraulic
Hoses" on page 3-6)
IMPORTANT
Note the polarity on each hose grip, Plus (+) is for the
pressure side hydraulic hose, and Minus (-) is for the return
side hydraulic hose. (See Fig. # 3-88) If you do not have
polarity marked hose grips, use colored electrical tape.
Fig. # 4-5 Determine Hydraulic Hose Polarity: Pressure (+)
Or Return (-)
Hose Grip
(-)
Hose Grip
(+)
2. Use the hydraulic hoses identified here to connect to the
tractor.
RETURN
(-) HOSE
SUPPLY
(+) HOSE
Fig. # 4-6 Identifying Hydraulic Hoses To Connect To The
Tractor
IMPORTANT
Be sure the hydraulic hoses are correctly connected to the
tractor to allow the tractor hydraulic system to enter the
FLOAT POSITION
SUPPLY (+)
SCV PORT
RETURN (-)
HOSE
SUPPLY (+)
HOSE
RETURN (-)
SCV PORT
Fig. # 5-7 Connect Hydraulic Hoses To Tractor
NOTE
Tractor Manufacturer’s SCV Configurations Differ From
One Manufacturer To Another. Read your tractor’s oper -
ator’s manual to determine which SCV ports to use with
the Kwik-Pit.