Nortel Meridian SL-100 SE, Replacement

Page: 69 / 338

FSP card replacement procedures 69
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT0X91AE
in Meridian Cabinet Remote Module-S
(continued)
where
unit_no
is the unit number of PM (0 or 1)
9 Post the PM by typing
>POST pm_type
and press the Enter key.
where
pm_type
is the type of PM (RMM)
10 Manually busy the PM by typing
>BSY pm_type
and press the Enter key.
where
pm_type
is the RMM
At the shelf:
11
Power down the power converters associated with the card you
are replacing. The power converter for this cabinet is
NTMX72AB, usually found in slot 1 or 26. Lift up the handles on
the power converter card and slide the card towards you (about
one inch). The circuit breakers associated with the shelf and unit
will go to the OFF position.
12 Unscrew the slotted nut on the left hand side of the FSP.
13 Open the FSP.
DANGER
Static electricity damage
Wear a wrist strap connected to the wrist-strap
grounding point of a frame supervisory panel
while handling circuit cards. This protects the
cards against damage caused by static
electricity.