Nortel Meridian SL-100 SE, Replacement

Page: 75 / 338

IPE card replacement procedures 75
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT8D22
in an IPE module
Application
Use this procedure to replace the NT8D22 card in an intelligent
peripheral equipment (IPE).
The following figure shows the location of the XSM at the rear of the
pedestal.
The following flowchart is a summary of this procedure. Use the
instructions in the step-action table that follows the flowchart to perform
the procedure.
Procedure to replace NT8D22 cards in an IPE
PEC Suffixes Name
NT8D22 AC extended system monitor
(XSM)
CAUTION
DISCONNECT FROM SOURCE
OF DC POWER BEFORE
REMOVING THIS UNIT
FROM THE PEDESTAL
J3 J5 J6 J4
0 1 2 3
MDL
BLO
extended system monitor (XSM)
Pedestal Base
(rear view with grill removed)