Nortel Meridian SL-100 SE, Replacement

Page: 327 / 338

MCRM-S card replacement procedures 327
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NTMX87
in an MCRM-S EXT or RCC2 shelf
(continued)
Replacing an NTMX87 in an MCRM-S EXT or RCC2 shelf
At your current location
1 Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
the procedure for verifying or accepting cards, or have been
directed to this procedure by your maintenance support group.
2
Obtain a replacement card. Ensure that the replacement card
has the same product engineering code (PEC), including suffix,
as the card to be removed.
At the MAP terminal
3 Set the MAP terminal to the peripheral module (PM) level and
post the RCC2 by typing the following string:
> MAPCI;MTC;PM;POST RCC2 rcc2_unit_no
and pressing the Enter key.
where
rcc2_unit_no
is the number of the RCC2 unit to be posted (0 or 1)
Example of a MAP response
CAUTION
Loss of service
When replacing a card in the RCC2, ensure
that the unit in which you are replacing the
card is inactive and that the mate unit is
active.