Nortel Meridian SL-100 SE, Replacement

Page: 278 / 338

MCRM-S card replacement procedures 278
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NTMX74
in an MCRM-S RCC2
(continued)
At the MAP terminal
7 Busy the inactive PM unit by typing the following string:
> bsy unit rcc2_unit_no
and pressing the Enter key.
where
rcc2_unit_no
is the number of the inactive RCC2 unit (0 or 1)
At the RCC2 shelf
8
Put on a wrist strap.
9 Locate the card to be removed on the appropriate shelf as
shown in the following figures.
CAUTION
Static electricity damage
Before removing any cards, put on a wrist
strap and connect it to the wrist strap
grounding point on the left side of the frame
supervisory panel of the RCC2. This protects
the equipment against damage caused by
static electricity.