Nortel Meridian SL-100 SE, Replacement

Page: 211 / 338

211 MCRM-S card replacement procedures
555-4031-547 Standard 12.02 July 2002
NT6X87
in an MCRM-S LCME
(continued)
Replacing an NT6X87 in an MCRM-S LCME
At your current location
1 Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
the procedure for verifying or accepting cards, or have been
directed to this procedure by your maintenance support group.
2 Obtain a replacement card. Ensure that the replacement card
has the same product engineering code (PEC), including suffix,
as the card to be removed.
At the MAP terminal
3 Post the line equipment number (LEN) of the card to be replaced
by typing the following string:
> MAPCI;MTC;LTP;POST L site_name lcm(e)_no
unit_no lsg_no ckt_no
and pressing the Enter key.
where
site_name
is the name of the LCM(E) with the faulty card.
lcm(e)
is the number of the LCM(E) with the faulty card.
unit_no
is the number of the LCM(E) unit with the faulty card.
lsg_no
is the number of the LSG with the faulty card.
ckt_no
is the number of the circuit associated with the faulty card
4 Busy the NT6X87 in an MCRM-S line card by typing the following
string:
>BSY
and pressing the Enter key.
Example of a MAP response