Nortel Meridian SL-100 SE, Replacement

Page: 132 / 338

MCRM-S card replacement procedures 132
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT2X06
in an MCRM-S RMM
(continued)
4 Busy the RMM by typing the following string:
>BSY
and pressing the Enter key.
At the RMM shelf
5
Put on a wrist strap.
6 Power down the unit by setting the ON/OFF switch on the power
converter faceplate to the OFF position. Both the converter FAIL
LED and FRAME FAIL lamp on the Frame Supervisory Panel
(FSP) turn ON. An audible alarm may sound. If an alarm does
sound, silence it by typing the following string at the MAP
terminal:
> sil
and pressing the Enter key.
7 Locate the card to be removed on the appropriate shelf as
shown in the following figures.
CAUTION
Static discharge may cause damage to circuit packs
Put on a wrist strap and connect it to the frame
of the RMM before removing any cards. This
protects the RMM against service degradation
caused by static electricity.