Nortel Meridian SL-100 SE, Replacement

Page: 299 / 338

MCRM-S card replacement procedures 299
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NTMX79
in an MCRM-S EXT
(continued)
Replacing an NTMX79 in an MCRM-S EXT
At your current location
1 Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
the procedure for verifying or accepting cards, or have been
directed to this procedure by your maintenance support group.
2
Obtain a replacement card. Ensure that the replacement card
has the same product engineering code (PEC), including suffix,
as the card to be removed.
At the MAP terminal
3 Set the MAP terminal to the peripheral module (PM) level and
post the RCC2 by typing the following string:
>MAPCI;MTC;PM;POST RCC2 rcc2_no
and pressing the Enter key.
where
rcc2_no
is the number of the RCC2 with the faulty card
4 Determine from the MAP display if the card that is to be removed
is on the inactive unit.
CAUTION
Loss of service
When replacing a card in the RCC2, ensure
that the unit in which you are replacing the
card is inactive and that the mate unit is
active.
If faulty card is on Do
active unit Step 5
inactive unit Step 6