Nortel Meridian SL-100 SE, Replacement

Page: 196 / 338

MCRM-S card replacement procedures 196
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT6X74
in an MCRM-S RMM
(continued)
19 Return the RMM to service by typing the following string:
>RTS
and pressing the Enter key.
20 Use the following information to determine where to proceed.
21 Use the following information to determine where to proceed.
At the MAP terminal
22 Return all trunks in the RMM to service by typing the following
strings:
> trks;ttp;post tm rmm rmm_no
and pressing the Enter key.
> bsy all;rts all
and pressing the Enter key.
where
rmm_no
is the number of the RMM in which the card has been
replaced.
23 Use the following information to determine where to proceed.
24 Observe the alarm that is produced and go to the appropriate
alarm clearing procedure in the Alarm Clearing Procedures.
If RTS Do
passed Step 21
failed Step 25
If referred or directed to
this procedure from Do
an alarm clearing procedure Step 25
other Step 22
If RTS Do
passed Step 27
failed Step 25