Nortel Meridian 1 Option 11C, Administration And Maintenance

Page: 473 / 507

Appendix A — 2Mb PRI implementation Page 459 of 492
Option 11C ISDN BRI Administration and Maintenance
8 Use Overlay 73 to change trunk pad category values
Prompt Response Description
REQ CHG
TYPE PRI2 2 Mb PRI
FEAT PADS
PDCA # PAD table-0 is default and is hard coded
The following prompts define the pad levels.
The receiving pad code is r and the transmission pad code is t. These
entries have the range 0-15. The pad values (in decibels) relating to these
codes are shown after this table.
ONP r t On-premises extension
DSET r t Meridian Digital set
(prompted only if the 2 Mb Gateway feature is
equipped)
Author’s Note—p7/dave/gateway
OPX r t Off-premises extension
DTT r t Digital TIE trunks
SDTT r t digital Satellite TIE trunks
NTC r t Nontransmission compensated
TRC r t Transmission compensated
DCO r t digital COT, FEX, WAT, and DID trunks
VNL r t VIA NET LOSS
DTO r t 2 Mb PRI2 digital TOLL office trunks
ACO r t Analog CO or WATS trunks
AFX r t Analog FEX trunks
ADD r t Analog DID trunks
SATT r t analog satellite TIE trunks
ATO r t analog TOLL office trunks
PRI2 r t 2 Mb 2 Mb PRI trunk
(prompted only if the 1.5/2 Mb Gateway
feature is equipped and TYPE=2 Mb PRI)
Author’s Note—p7/dave/gateway