Nortel Meridian 1 Option 11C, Administration And Maintenance

Page: 391 / 507

Chapter 8 — Service changes and maintenance Page 377 of 492
Option 11C ISDN BRI Administration and Maintenance
Running a panel test
1 Press the Hold and Rls keys simultaneously until the following main
menu is displayed:
MAIN MENU
CONFIG
2 Press
#
. The following prompt is displayed:
ENTER PASSWORD
3 Dial 4736 (ISDN) and press #. The following message is displayed:
CONFIGURATION MENU
TEI
4 Press
*
until the following option is displayed:
CONFIGURATION MENU
KEY TEST
5 Press
#
to begin the key test.
The M5209T tests the display and indicators by flashing a
checkerboard pattern on the display, and by turning on the
half-diamonds one at a time.
After the display test, the following message appears:
DEPRESS ALL KEYS
Press the following keys; as you do, check that each key is displayed
as it is pressed.
0-9 (dial pad keys)
*
#
volume up/volume down
Hold
Rls
When all keys have been tested, the following should be displayed:
0123456789
*#
UDHR