Nortel Meridian 1 Option 11C, Administration And Maintenance, Page: 356 / 507

Page 342 of 492 Chapter 8 — Service changes and maintenance
553-3011-311 Standard 7.0 May 1999
LD 27 — Printing a DSL
Removing a DSL
You can remove a DSL by specifying its location. To remove a DSL, you
must first remove all the TSPs assigned to this DSL. When you remove the
last configured DSL on a card, the card is automatically disabled.
Note: You cannot OUT a DSL if an active clock exists on the DSL. The
DSL must be idle or disabled before proceeding. Use the STAT c and
DISU c dsl# commands in LD 32 to query the status of the DSL and to
disable it.
Prompt Response Comment
REQ PRT Print an ISDN BRI component
TYPE DSL DSL
DSL cc dsl#,
cc
<cr> DSL information
The values for this prompt are:
cc dsl#=Prints information for the specified dsl# on card
cc
cc=Prints information for all DSLs on the specified card
cc
<cr>=Prints the data for all DSLs in the system
DATE (<cr>)
x y z Print data and display the last active date, where:
x=day (1-31)
y=month (JAN-DEC),
z=year (1979-9999)
specifies the starting date of the data to be displayed or
printed.
PAGE YES, (NO) yes=prints one DSL per page, no=prints without paging
DES xxxxxx
<cr> 1 to 6-digit alphanumeric DSL designator
Not prompted if DSL=cc dsl# and trunk DSL
<cr>=No designator for DSLs
NACT YES, (NO) Activity date is updated to current date