Nortel Meridian 1 Option 11C, Administration And Maintenance

Page: 342 / 507

Page 328 of 492 Chapter 8 — Service changes and maintenance
553-3011-311 Standard 7.0 May 1999
Removing an LAPD protocol group
You can remove a previously configured LAPD protocol group that is not
currently assigned to a DSL. If a protocol group is assigned to a DSL, you
must delete the DSL before removing the protocol group. You can also
remove all protocol groups not assigned to DSLs by entering ALL at the
PGPN prompt.
LD 27— Removing a protocol group
Printing a protocol group
You can print the configuration information for a specific protocol group or
for all protocol groups.
LD 27— Printing a protocol group
Prompt Response Comment
REQ OUT Remove an ISDN/BRI component
TYPE LAPD Protocol group
PGPN 0-15,ALL, <cr> Protocol group number
The values for this prompt are:
0-15=Removes a specified protocol group from 0-15
ALL=Removes all protocol groups
<cr>=No change, i. e. the protocol group doesn't get
removed.
You cannot remove a protocol group if it is assigned to
a DSL or a route.
Prompt Response Comment
REQ PRT Prints an ISDN BRI component
TYPE LAPD Protocol group
PGPN 0-15,<cr> Protocol group number
The values for this prompt are:
0-15=Prints a specified protocol group from 0-15
<cr>=Prints all protocol groups and the number of
DSLs in each group