Nortel Meridian 1 Option 11C, Administration And Maintenance, Page: 244 / 507

Page 230 of 492 Chapter 5 — ISDN BRI line and packet data implementation
553-3011-311 Standard 7.0 May 1999
LDN 0, 1, 2, 3
(NO) Departmental listed directory number
The values for this prompt are:
0, 1, 2, 3=Departmental listed directory number specified in
Customer Data Block Program LD 15
NO=No departmental listed directory number associated
with the DSL
XLST (0)-254 Pretranslation group. This prompt appears if configured in
customer data block.
MTEI 1-(8)-20 Maximum number of Terminal Endpoint Identifiers, both
static and dynamic combined which can be assigned to the
logical terminals on this DSL.
LTEI n1 n2 mm,
<cr>, Xmm
n1 = Logical Terminal Identifier (LTID)
n2 = static Terminal Endpoint Identifier (TEI)
mm (0-63) = MTEI, the maximum number of LTID and TEI
n1 = 0 -15 and n2 = 0-1023
0 0 is invalid. 15 1023 is invalid.
Logical Terminal Identifier (LTID) and static Terminal
Endpoint Identifier (TEI) pair for D-channel packet data
transmission.
MTEI = the maximum number of these pairs.
LTID = Logical Terminal Group (LTG) and Logical Terminal
Number (LTN). LTG and LTN are entered as part of the
DPN configuration.
The TE I must match the one in the terminal. By entering all
three here, the MISP is able to route data from the terminal
to the DPN packet switch.
Xmm = Deletes the LTID and TEI for the specified TEI.
MCAL 2-(16)-32 Maximum number of calls on a DSL at one time. This
includes calls waiting and on hold. Warning is received if
less than 8 is specified.
MTSP 1-(8)-16 Maximum number of TSPs allowed for a DSL
PGPN 0-15 Protocol group number
The protocol group should be previously added as
described in
Configuring a protocol group.
Prompt Response Comment