manualshive.com logo in svg

Nortel AN Series, Configuration Manual, Page: 7 / 142

Share
Download
Nortel AN Series Configuration Manual Download Page 7

308614-14.20 Rev 00

vii

Creating the BootP Client Interface Table .....................................................................3-14

Chapter 4 
Configuring Netboot Client Services

Using Netboot Configuration Commands  .......................................................................4-2

Setting the Boot Configuration ........................................................................................4-3

Using the bconfig Command Format  .......................................................................4-3

Examples of Using the bconfig Command  ...............................................................4-4

Setting the Netboot Interface Configuration ....................................................................4-5

Configuring a Serial Interface for Network Booting  ..................................................4-5

Configuring an Ethernet Interface for Network Booting ............................................4-7

Configuring an ARN Token Ring Interface for Network Booting  ...............................4-8

Enabling and Disabling Interfaces with the ifconfig Command  ................................4-9

Examples of Using the ifconfig Command  ...............................................................4-9

Verifying Your Configuration ..........................................................................................4-10

What to Do Next  ...........................................................................................................4-11

Chapter 5 
Managing ANH Repeater Ports

Enabling and Disabling ANH Repeater Ports  .................................................................5-2

Testing and Resetting ANH Repeater Ports  ...................................................................5-5

Appendix A 
Site Manager Parameters

Netboot and Directed Netboot Parameters .................................................................... A-2

Netboot Interface Parameters ........................................................................................ A-4

BootP Relay Agent Interface Parameters  ...................................................................... A-7

BootP Client Interface Address Parameters  .................................................................. A-8

Repeater Port Group Parameters  .................................................................................. A-9

Appendix B 
Troubleshooting Network Boot Problems

Solving Startup Problems  .............................................................................................. B-1

Router Fails to Get IP Address ................................................................................ B-2

Upstream Router Not Receiving BootP Requests  ............................................ B-2

Upstream Router Not Sending BootP Responses ............................................ B-2

Router Fails to Netboot  ........................................................................................... B-3

Upstream Router Not Receiving BootP Requests  ............................................ B-3

Summary of Contents for AN Series















































































































































Reviews:

No comments