manualshive.com logo in svg

Nortel AN Series, Configuration Manual, Page: 40 / 142

Share
Download
Nortel AN Series Configuration Manual Download Page 40

Configuring Remote Access for AN and Passport ARN Routers

1-22

308614-14.20 Rev 00

Local Boot

Complete the following steps for the Local Boot option:

1.

Complete the Quick-Start configuration worksheets. (See Appendix C.)

2.

The person at the AN/ANH or ARN router site establishes a Technician 
Interface session, or you establish a session using a modem. (See the hardware 
installation guide.) 

If you are not at the router console, provide the person at the console with the 
information in the configuration worksheets. The hardware installation guide 
contains duplicate worksheets. (See Appendix C.)

3.

The person at the router console runs the installation script (

install.bat 

for the 

AN/ANH and 

inst_arn.bat 

for the ARN), using the information provided in 

the worksheets you completed in step 1. (See Appendix C and your hardware 
installation guide.)

4.

The installation script records the responses in a configuration file.
(See Appendix C and your hardware installation guide.)

If the configuration file meets your network requirements, the router starts 
bridging and routing traffic. 

5.

Use the Site Manager Statistics Manager and Events Manager tools to verify 
that the AN/ANH or ARN router is routing traffic as specified in the 
configuration file. (See 

Configuring and Managing Routers with Site 

Manager

.)

Summary of Contents for AN Series















































































































































Reviews:

No comments