96
Basic configuration tasks
—End—
Retrieving a binary configuration file
To retrieve a binary configuration file from a TFTP server, perform the
following procedure.
Step
Action
1
Open the FileSystem screen by selecting Edit > File System from
the JDM menu.
2
Select the Config/Image/Diag file tab. This tab is illustrated in
Device Manager File System screen" (page 84)
.
3
If you retrieve the file from a USB storage device, skip this step;
otherwise, if a default TFTP server is not already specified (or
another TFTP server is to be used), enter the IP address of the
TFTP server to use in the LoadServerAddr field.
4
In the BinaryConfigFilename field, enter the name of the
configuration file to retrieve.
5
If the configuration file to be retrieved to a member of a stack, enter
the stack unit number in the BinaryConfigUnitNumber field. If it
is a stand-alone unit, specify 0.
6
If you retrieve the configuration file from a USB storage device,
enter the stack unit number in which the USB device is inserted in
the UsbTargetUnit field.
7
In the Action field, select dnldConfig to download the file from a
TFTP server or dnldConfigFromUsb to download the file from a
USB storage device.
8
Click Apply.
—End—
Saving the current configuration
The configuration currently in use on a switch is regularly saved to the flash
memory automatically. However, you can manually initiate this process
using the Save Configuration tab.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.
