Nortel 4500 Series Overview-System Configuration Download

Page: 261 / 320

Configuring LLDP using the CLI

261

Parameters and variables

Description

port-protocol-vlan-id

The port and protocol VLAN ID TLV (default
value is none).

protocol-identity [EAP] [LLDP]
[STP]

The protocol identity TLV (default value is
none).

default lldp tx-tlv dot3 command

The

default lldp tx-tlv dot3

command sets the optional IEEE

802.3 organizationally-specifc TLVs to their default values. The syntax for
the

default lldp tx-tlv dot3

command is

default lldp tx-tlv [port <portlist>] dot3

[mac-phy-config-status] [mdi-power-support]

[link-aggregation][maximum-frame-size]

Run the

default lldp tx-tlv dot3

command in Interface

Configuration command mode.

"default lldp tx-tlv dot3 command parameters and variables" (page 261)

describes the parameters and variables for the

default lldp tx-tlv

dot3

command.

default lldp tx-tlv dot3 command parameters and variables

Parameters and variables

Description

port <portlist>

The ports affected by the command.

mac-phy-config-status

The MAC/Phy Configuration/Status TLV
(default value is false: not included).

mdi-power-support

The power via MDI TLV (default value is false:
not included).

link-aggregation

The link aggregation TLV (default value is
false: not included).

maximum-frame-size

The maximum frame size TLV (default value
is false: not included).

no lldp port command

The

no lldp port

command disables LLDP features on the port. The

syntax for the

no lldp port

command is

no lldp [port <portlist>] [config notification] [status]

Run the

no lldp port

command in Interface Configuration command

mode.

Nortel Ethernet Routing Switch 4500 Series

Overview — System Configuration

NN47205-500

02.01

Standard

5.0

23 February 2007

Nortel Networks Confidential

Summary of Contents for 4500 Series

































































































































































































































































































































Search results

Summary of Contents for 4500 Series

Reviews:

Related manuals for 4500 Series

Brands by name

Popular brands

Nortel 4500 Series, Overview-System Configuration

Search results

Summary of Contents for 4500 Series

Reviews:

Related manuals for 4500 Series

Brands by name

Popular brands