38
4500 Series user interfaces
3
Click OK.
Default Properties fields
Area
Item
Description
Status Interval
Interval at which statistics and status information is gathered.
For a full stack, set this interval from 120 to 300 seconds.
Hotswap Detect
every
The frequency at which Device Manager polls for hot swap
module information. This value is relative to the Status Interval
value. For example, if the Status Interval is 120, and the value
for Hotswap Detect every is 2, Device Manager polls the hot
swap modules every 240 seconds. If you want less frequent
hot swap polling, set this value to poll every 2 or 3 intervals.
Polling
Enable
Enables (true) or disables (false) periodic polling of the device
for updated status. If polling is disabled, the chassis status is
updated only when you click Refresh on the Chassis tab.
Retry Count
Number of times Device Manager sends the same polling
request if a response is not returned to Device Manager. You
can set this field to three or four.
Timeout
Length of each retry of each polling waiting period. When you
access the device through a slow link, you can increase the
timeout interval and then change the Retransmission Strategy
to superlinear.
Trace
The trace field is used to enable and disable SNMP tracing.
When Trace is selected, SNMP protocol data units (PDUs) are
displayed in the Device > Log dialog box.
Listen for traps
When selected (enabled), Device Manager listens for traps
from the device.
Max Traps in
Log
The specified number of traps that can exist in the trap log.
The default is 500.
Trap Port
The UDP port that Device Manager uses to listen for SNMP
traps.
Listen for
Syslogs
Enable the Device Manager to listen to the syslog.
Confirm row
deletion
When selected (enabled), Device Manager displays a
confirmation dialog box before you delete a system table row.
Default Read
Community
The default Read Community type. Edit this field by highlighting
the current value and typing over it.
SNMP
Default Write
Community
The default Write Community type. Edit this field by highlighting
the current value and typing over it.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.
