Nortel 4500 Series Overview-System Configuration Download

Page: 84 / 320

Basic configuration tasks

You can track the progress of the download by observing the front panel
LEDs. For more information about this topic, see

"LED activity during

software download" (page 89)

Changing switch software in the Java Device Manager

To change the software version running on the switch that uses the Java
Device Manager, perform the following procedure.

Step

Action

Connect to the switch using the Java Device Manager (JDM). For
specific information about this topic, see

"Opening a Switch with the

Java Device Manager" (page 40)

From the JDM menu, select Edit > File System.

The File System screen appears, as shown in

"Java Device Manager

File System screen" (page 84)

Java Device Manager File System screen

Select the Config/Image/Diag file tab if it is not already selected.

Specify the information necessary to perform the download.

"File

System screen fields" (page 84)

outlines each field on this screen.

File System screen fields

Field

Description

LoadServerAddr

The IP address of the TFTP server on which
the new software images are stored for
download.

Nortel Ethernet Routing Switch 4500 Series

Overview — System Configuration

NN47205-500

02.01

Standard

5.0

23 February 2007

Nortel Networks Confidential

Summary of Contents for 4500 Series

































































































































































































































































































































Search results

Summary of Contents for 4500 Series

Reviews:

Related manuals for 4500 Series

Brands by name

Popular brands

Nortel 4500 Series, Overview-System Configuration

Search results

Summary of Contents for 4500 Series

Reviews:

Related manuals for 4500 Series

Brands by name

Popular brands