Nortel 252, Configuration

Page: 306 / 345

306 Appendix H NetBIOS filter commands
NN47923-501
Display NetBIOS filter settings
Figure 155 NetBIOS Display Filter Settings Command Example
Syntax:
sys filter netbios disp
This command gives a read-only list of the current NetBIOS filter modes.
The filter types and their default settings are as follows:
NetBIOS filter configuration
Syntax:
sys filter netbios config <type> <on|off>
where
<type> identifies which NetBIOS filter (numbered 0-3) to configure.
============== NetBIOS Filter Status ===============
Between LAN and WAN: Block
IPSec Packets: Forward
Trigger Dial: Disabled
Table 75 NetBIOS filter default settings
Name Description Example
Between LAN and
WAN
This field displays whether NetBIOS packets are
blocked or forwarded from the LAN to the WAN or
from the WAN to the LAN.
Forward
IPSec Packets
This field displays whether NetBIOS packets sent
through a VPN connection are blocked or
forwarded.
Forward
Trigger dial
This field displays whether NetBIOS packets are
allowed to initiate calls. Disabled means that
NetBIOS packets are blocked from initiating calls.
Disabled