Nortel 252, Configuration

Page: 44 / 345

44 Chapter 2 Introducing the SMT
NN47923-501
After the tests, the Business Secure Router asks you to press
[ENTER] to continue,
as shown in Figure 2 .
Figure 2 Initial screen
Logging on to the SMT
The logon screen appears after you press [ENTER] , prompting you to enter the
username, as shown in Figure 3 .
Type the username (“nnadmin “is the default) and press [ENTER] .
The logon screen prompts you to enter the password.
Figure 3 SMT Login
Type the password (“PlsChgMe!” is the default) and press [ENTER] . As you type
the password, the screen displays an X for each character you type.
Note that if there is no activity for longer than five minutes after you log on, your
Business Secure Router will automatically log you off and display a blank screen.
If you see a blank screen, press
[ENTER]
to bring up the logon screen again.
Navigating the SMT interface
The SMT is an interface that you use to configure your Business Secure Router.
initialize ch =0, ethernet address: 00:A0:C5:22:1A:03
initialize ch =1, ethernet address: 00:A0:C5:22:1A:04
Press ENTER to continue...
Enter Username : XXXX
Enter Password : XXXX