Nortel 252 Page 63 Configuration Download

Page: 63 / 345

Chapter 3 WAN and Dial Backup Setup

Nortel Business Secure Router 252 Configuration — Advanced

Authen

This field sets the authentication protocol used for

outgoing calls.
Options for this field are:

CHAP

PAP

- Your Business Secure Router will accept

either

CHAP

PAP

when requested by this remote

node.

CHAP

- accept CHAP only.

PAP

- accept PAP only.

CHAP/PAP

Pri Phone #
Sec Phone #

Enter the first (primary) phone number from the ISP for

this remote node. If the Primary Phone number is busy

or does not answer, your Business Secure Router dials

the Secondary Phone number if available. Some areas

require dialing the pound sign # before the phone

number for local calls. Include a # symbol at the

beginning of the phone numbers as required.

Edit PPP

Options

Move the cursor to this field and use the space bar to

select [Yes] and press [Enter] to edit the PPP options for

this remote node. This brings you to

Menu 11.2.1 -

Remote Node PPP Options

(

see “Editing PPP

options”

(default)

Rem IP Addr

Leave the field set to 0.0.0.0 (default) if the remote

gateway has a dynamic IP address. Enter the remote

gateway’s IP address here if it is static.

0.0.0.0

(default)

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR]

to select

Yes

and press [ENTER] to go to

Menu 11.2.2 -

Remote Node Network Layer Options

. Please

see

“Editing TCP/IP options”

for more information.

(default)

Edit Script

Options

Press [SPACE BAR] to select

Yes

and press [ENTER]

to edit the AT script for the dial backup remote node

(

Menu 11.2.3 - Remote Node Script

). Please

see

“Editing logon script”

for more information.

(default)

Telco Option

Allocated

Budget

Enter the maximum number of minutes that this remote

node may be called within the time period configured in

the

Period

field. The default for this field is 0 meaning

there is no budget control and no time limit for accessing

this remote node.

(default)

Period(hr)

Enter the time period (in hours) for how often the budget

should be reset. For example, to allow calls to this

remote node for a maximum of 10 minutes every hour,

set the

Allocated Budget

to 10 (minutes) and the

Period

to 1 (hour).

(default)

Table 10

Fields in Menu 11.2 Remote Node Profile (Backup ISP)

Field

Description

Example

Summary of Contents for 252


























































































































































































































































































































































Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands

Nortel 252, Configuration

Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands