Nortel 252 Page 282 Configuration Download

Page: 282 / 345

282

Appendix G Command Interpreter

NN47923-501

private <yes|no>

Turns private mode on or off.

active <yes|no>

Enables or disables a static route rule.

dropIcmp

[0|1]

Sets whether or not the device allows ICMP

fragment packets.

igmp

debug

[level]

Sets IGMP debug level.

forwardall

[on|off]

Activates or deactivates IGMP forwarding to

all interfaces flag.

querier

[on|off]

Turns on or off IGMP stop query flag.

iface

<iface> grouptm
<timeout>

Sets IGMP group timeout for the specified

interface.

<iface> interval
<interval>

Sets IGMP query interval for the specified

interface.

Adds an interface to a group.

<iface> leave
<group>

Removes an interface from a group.

<iface> query

Sends an IGMP query on the specified

interface.

<iface> rsptime
[time]

Sets the IGMP response time.

<iface> start

Turns on IGMP on the specified interface.

<iface> stop

Turns off IGMP on the specified interface.

Sets the IGMP Time To Live threshold.

<iface> v1compat
[on|off]

Turns on or off IGMP version 1 compatibility

on the specified interface.

robustness

<num>

Sets the IGMP robustness variable.

status

Displays the IGMP status.

alg

display

Shows whether the Application Layer

Gateway is enabled or disabled.

siptimeout <timeout

second> or 0 for
no timeout

Sets the SIP timeout period.

Table 67

IP commands

Command

Description

Summary of Contents for 252


























































































































































































































































































































































Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands

Nortel 252, Configuration

Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands