Nortel 252 Page 206 Configuration Download

Page: 206 / 345

206

Chapter 16 System Maintenance menus 8 to 10

NN47923-501

Figure 111

Menu 24.10 System Maintenance: Time and Date Setting

Table 46

describes the fields in

Figure 111

Menu 24.10 - System Maintenance - Time and Date Setting

Time Protocol= NTP (RFC-1305)
Time Server Address= a.ntp.alphazed.net

Current Time: 01 : 07 : 41
New Time (hh:mm:ss): N/A N/A N/A

Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): N/A N/A N/A

Time Zone= GMT

  Daylight Saving= No
  Start Date (mm-nth-week-hr): Jan. - 1st - Sat. - 00
  End Date (mm-nth-week-hr): Jan. - 1st - Sat. - 00

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Table 46

Time and Date Setting Fields

Field

Description

Time Protocol

Enter the time service protocol that your time server uses. Not all

time servers support all protocols, so check with your ISP or network

administrator or use trial and error to find a protocol that works. The

main differences between the time protocols are the format.

Daytime (RFC 867)

format is the day/month/year/time zone of the

server.

Time (RFC-868)

format displays a 4-byte integer giving the total

number of seconds since 1970/1/1 at 0:0:0.
The default,

NTP (RFC-1305)

, is similar to

Time (RFC-868)

Select

Manual

to enter the new time and new date manually.

Time Server

Address

Enter the IP address or domain name of your timeserver. Check with

your ISP or network administrator if you are unsure of this

information. The default is a.ntp.alphazed.net.

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format. This field is

available when you select

Manual

in the

Time Protocol

field.

Summary of Contents for 252


























































































































































































































































































































































Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands

Nortel 252, Configuration

Search results

Summary of Contents for 252

Reviews:

Related manuals for 252

Brands by name

Popular brands