Nortel 252, Configuration

Page: 280 / 345

280 Appendix G Command Interpreter
NN47923-501
enable [0:no/1:yes]
Enables or disables content filtering.
exemptZone
display
Displays content filtering exempt zone
information.
actionFlags
[type(1-3)][enabl
e/disable]
Enables or disables content filtering exempt
zone action flags that determine to which IP
addresses content filtering applies.
add [ip1] [ip2]
Sets a range of IP addresses to be in the
exempt zone.
delete [ip1]
[ip2]
Removes a range of IP addresses from the
exempt zone.
reset
Returns the exempt zone settings to the
previous configuration.
customize
Uses the customize commands to configure
content filtering for trusted Web sites,
forbidden Web sites and keyword blocking.
display
Displays the content filtering customize action
flags.
actionFlags
[act(1-7)]
[enable/disable]
Sets the content filtering customize action
flags.
logFlags
[type(1-3)][enabl
e/disable]
Sets the content filtering customize log flags.
add [string]
[trust/untrust/
keyword]
Adds a trusted Web site, forbidden Web site
or keyword blocking string.
delete [string]
[trust/untrust/
keyword]
Deletes a trusted Web site, forbidden Web
site or keyword blocking string.
reset
Returns to the default configuration.
tredir
failcount <count>
Sets the number of times that the device can
ping the target without a response before
forwarding traffic to the backup gateway.
partner <ipaddr>
Sets the traffic redirect backup gateway IP
address.
target <ipaddr>
Sets the IP address that the device uses to
test WAN accessibility.
Table 67 IP commands
Command Description